(2 Pack) ATA PTX5v1 Garage Door Remote Control – TrioCode GDO 11v1 6v3 6v4

Two-pack PTX5v1 compatible remotes for ATA TrioCode openers

ATA motors this PTX5v1 two-pack operates

The PTX5v1 standard spans a large slice of ATA's opener catalogue, and this pack works with the DCB-05 dual gate controller, the GDO-6v3 and GDO-6v4 EasyRoller, GDO-7v2 and GDO-7v3 SecuraLift, GDO-8v3 Shed Master, the GDO-9 family (GDO-9, 9v2 and 9v3 across Dynamo, SecuraLift, Enduro and Dominator), the GDO-10v1 Toro, GDO-11v1 Ero, the NES-24v1 NeoSlider and the SGO-1 Elite. If you prefer a single unit, the ATA PTX5v1 TrioCode garage door remote replacement uses the identical compatibility list. The TrioCode protocol used by this generation spans roller doors, sectional doors, sliding gates and swing gates, so one remote standard covers much of the brand's residential catalogue from that era.

Where this remote does NOT fit — read before buying

ATA changed its remote architecture over the years, and this version will not operate every ATA motor. It is not compatible with GEN2 motors or v2 remotes, which have a grey case with grey buttons, nor with motors installed after 2015. It also will not replace the blue-cased PTX-4 433MHz remotes, or older ATA motors using SecuraCode 433MHz or 27MHz TX remotes unless a Tricode receiver card is fitted. Owners of those newer systems should instead order the ATA PTX-5V2 TrioCode 128 remote replacement, which handles the later generation. When unsure, photograph both the remote and the motor label; between the two, the generation is always identifiable.

Sorting the whole household in one purchase

Two remotes at $34.95 means each car gets its own transmitter coded in the same sitting, which is the arrangement most double-garage homes end up wanting anyway. Programming follows the standard ATA learn procedure in your opener's manual and takes a few minutes per unit. If your original remote is actually the older SecuraCode type, the ATA PTX-4 SecuraCode garage door remote is the matching part. Identifying which ATA remote generation you own — by case colour and motor model — is the one step that guarantees a successful order. Keep the packaging until both remotes are coded and tested against the opener, and the purchase is risk-free.

Why order from The Remote Factory

ATA compatibility questions land in our inbox daily, and because The Remote Factory is an Australian store specialising in replacement remotes and key fobs, the team can usually confirm your motor match from a photo sent to contact@theremotefactory.com.au. Orders are dispatched within 24 hours, with standard delivery of one to five working days across Australia and two to eight working days to New Zealand. The 30-day return policy means a mismatched remote is never money wasted. Pay however suits you — Visa, Mastercard, American Express, PayPal, Shop Pay and Apple Pay are all accepted.

Frequently asked questions