Stand-alone 433.92MHz receiver module for ATA PTX4 remotes
What an add-on receiver actually does
This unit is not a remote, it is the other half of the conversation: a stand-alone receiver that listens for ATA PTX4 transmitters on 433.92MHz and switches its outputs when a stored remote calls. Add-on receivers like this are the usual answer when an older motor's built-in radio has failed, when you want PTX4 remotes to run equipment that never supported them, or when a gate and a door need to respond to the same button. With two channels on board, one receiver can switch two separate devices, each triggered by its own button on the remote. Because the module is stand-alone, the age of the motor matters far less than whether its control inputs can be switched by the receiver's outputs, which an installer can confirm quickly.
Capacity for an entire apartment block
Storage is the headline figure here: the module can hold up to 500 remotes, which takes it well beyond household duty into body-corporate and commercial territory, think shared basement car parks, factory units and gated complexes where dozens of users each carry their own transmitter. Compatibility is deliberately narrow, though: it works only with the ATA PTX4 remote pictured in the main image, and no remotes are included with the receiver. Transmitters are sold separately, such as the ATA PTX-4 garage door remote Securacode replacement or the 2 pack ATA PTX-4 Securacode compatible remote.
Installation and pairing guidance
Because the receiver wires into the opener or gate controller, the seller recommends installation by a professional garage door installer, who will handle the wiring, mounting and output configuration safely. Pairing instructions ship with the unit and a manual is available for download from the listing, covering how remotes are stored against each channel. Allow for a power feed at the mounting point and a position with clear radio reception away from large metal surfaces, both standard considerations a professional will handle as part of the job. If you are modernising the whole setup at once, a cloning transmitter like the 2 pack universal 433.92MHz cloning key fob can complement the system for secondary fixed-code devices around the property.
Backed by The Remote Factory
Receivers, remotes and fobs are the entire catalogue at The Remote Factory, an Australian-based specialist, so stock like this ATA-compatible module is on the shelf and dispatched within 24 hours rather than ordered in on demand. Standard shipping reaches Australian addresses in one to five working days and New Zealand in two to eight working days. Payment options include credit cards, PayPal, Shop Pay and Apple Pay. If the receiver does not fit your installation plans, the 30-day return policy applies; wiring or compatibility questions can go to contact@theremotefactory.com.au before you order.
Frequently asked questions
Are any remotes included with this receiver?
No, remotes are not included; the listing supplies one compatible ATA PTX4 receiver only. It pairs exclusively with the ATA PTX4 remote shown in the listing's main image, so existing PTX4 transmitters can be stored to it, or new ones purchased separately. Budget for at least one transmitter per driver when planning the installation, as the receiver alone cannot open anything.
What do the two channels mean in practice?
Each channel is an independent switched output, so the receiver can control two different devices, for example a garage door motor on channel one and a gate or secondary door on channel two. Different buttons on a stored PTX4 remote trigger the different channels. For a single door installation you simply use one channel and leave the other spare for future equipment.
Can I install this garage receiver myself?
The seller recommends having the receiver installed by a professional garage door installer. The module needs to be wired to your opener or gate controller and mounted where it gets good radio reception, and an installer will also confirm the outputs are configured correctly for your equipment. Pairing instructions are provided with the unit, and the manual can be downloaded from the listing.
How many PTX4 remotes can it store?
The receiver has capacity for 500 remotes, operating on 433.92MHz across its 2 channels. That scale suits shared driveways, strata car parks and commercial premises where many users each need their own transmitter, while remaining straightforward for a single household with a handful of remotes. Each remote is stored to the receiver individually following the supplied pairing instructions.
- Choosing a selection results in a full page refresh.