Mazda two button flip key shell pair with logo
Fits the flip keys on Mazda 3, 5, 6, RX-7, RX-8 and BT-50
Mazda's two button flip key design served a long line of models, and this shell pack suits the Mazda 3, 5 and 6 along with the RX-7, RX-8 and the BT-50 ute. Each replacement case carries the Mazda logo, so the refurbished key keeps its factory appearance rather than looking like an aftermarket patch job. The typical candidates for this fix are keys with cracked housings, a sloppy flip hinge or buttons that need several presses to register — faults in the plastics, not the electronics, which is exactly what a shell swap addresses. Because the flip mechanism is spring-loaded, a worn hinge is usually the first failure point owners notice, and the logo detail keeps resale presentation intact.
Your chip and blade move across, nothing gets coded
The internal electronics and the cut key blade transfer from your current key into the new housing, which means the transponder your Mazda was programmed to recognise never changes. Central locking buttons and engine starting behave identically after the swap, with zero programming, dealer tools or locksmith coding involved. Fitment takes a few careful minutes: open the old case, lift the board and blade out, seat them in the fresh shell and snap it closed. Allow yourself a clear table and ten unhurried minutes per key for the neatest result. A single Mazda 2 button flip key shell is listed for anyone who needs just one.
Twin shells for the main key and the spare
Both keys that came with the car tend to deteriorate on the same timeline, so the two pack lets you bring the pair back to new condition in one evening. The Remote Factory's shell catalogue spans most badges on Australian roads — including a Hyundai Kia flip key shell for Sorento Cerato Sportage and a Toyota Camry Avalon 2 button key fob shell — so mixed garages can fix every tired key in a single order. Standardising the spares situation before a long road trip is a small job that pays off at the worst possible moments.
Reasons to order from The Remote Factory
From its Australian base, The Remote Factory concentrates entirely on key fobs and replacement remotes, and this Mazda listing reflects that focus with the correct logo-equipped profile for the flip key era. Orders head out within 24 hours; expect standard delivery in one to five working days around Australia or two to eight working days in New Zealand. Payments go through credit cards, PayPal, Shop Pay and Apple Pay. Should the shell not match your key, the 30-day return policy and the crew at contact@theremotefactory.com.au have you covered.
Frequently asked questions
Which Mazda models use this two button flip key shell?
The shell suits the two button flip key style found on the Mazda 3, Mazda 5, Mazda 6, RX-7, RX-8 and BT-50. It is designed to accept the original Mazda key components, and each case carries the Mazda logo. Compare your key's shape and button count against the product images before ordering, as some model years used different key designs.
Will my car need to be reprogrammed after the shell swap?
No reprogramming is involved. You move your existing circuit board, transponder and cut key blade from the damaged casing into the new shell, so the car continues recognising the exact same electronics. Remote locking and the immobiliser work as normal from the moment the swap is finished. The job needs no programming equipment, dealership visit or locksmith involvement.
Does the replacement shell come with a key blade?
No — these are blank shells supplied without blades or electronics. Your current cut blade transfers into the new housing along with the internals, keeping your doors and ignition working unchanged. If your original blade is damaged or heavily worn, a locksmith can cut a new one for the shell, but for most buyers the existing blade carries over fine.
How long will my order take to arrive in Australia?
The Remote Factory dispatches every order within 24 hours. On the standard service, Australian deliveries generally take one to five working days, while New Zealand orders arrive in two to eight working days. If the shell turns out not to match your Mazda key, a 30-day return policy applies and support is available at contact@theremotefactory.com.au.
- Choosing a selection results in a full page refresh.