Heavy duty 2000mAh battery for OZRoll ODS Control 10 controllers
Which OZRoll controllers take this battery
This aftermarket Ni-MH cell replaces OZRoll battery part number 15.910.185 and fits the older style ODS 10 controllers, specifically models 15.200.001, 15.202.001, 15.205.001 and 15.206.001. Roller shutter controllers of this generation are still installed on homes all over Australia, and the battery is usually the first component to fade while the electronics soldier on. Swapping the cell rather than replacing the whole controller is the economical repair. The dimensions are 148 x 57 x 15 mm, matching the original footprint so it sits in the controller housing the way the factory battery did.
Specifications that matter for roller shutter use
The cell delivers 14.4V with a heavy duty 2000mAh capacity, giving the controller more reserve than a tired original and better performance between charges. Ni-MH chemistry is the same type this controller family was designed around, so charging behaviour stays familiar. Roller shutters draw a meaningful burst of current each time they cycle, which is why capacity matters: a higher-capacity pack holds up through daily opening and closing across multiple shutters. When a controller starts dying mid-cycle or needs charging constantly, those are the classic signs the old pack has worn out and a fresh cell will restore normal service. Fitting is a like-for-like exchange inside the controller housing, well within reach of anyone comfortable changing batteries in household gear.
Replacing one battery or stocking up
If your home runs several shutters from multiple ODS 10 controllers, it rarely makes sense to replace a single battery while its siblings are the same age. The 2000mAh OZRoll Replacement Battery ODS Control 10 pairs two cells in one order for exactly that situation. The Remote Factory also carries general-purpose cells for the rest of the house, from the AAA 900mAh Rechargeable Ni-MH Battery used in rebuilding battery packs to the TAVICE 9V Lithium-ion Batteries 4 Pack for smoke alarms and test instruments. Grouping battery purchases into one parcel keeps a household's chargers, controllers and detectors all running without a string of separate small orders.
Why source OZRoll batteries here
The Remote Factory is an Australian-based specialist in replacement remotes and the batteries that power them, which is why an older-style OZRoll pack like this is still available off the shelf. Orders are dispatched within 24 hours, and standard delivery around Australia typically takes 1–5 working days. Checkout supports payment by Visa, Mastercard, American Express, PayPal, Shop Pay or Apple Pay. The purchase is covered by a 30-day return policy, and the team at contact@theremotefactory.com.au can confirm whether your controller model matches the 15.200.001 to 15.206.001 series before you commit to the order.
Frequently asked questions
Which OZRoll controller models does this battery fit?
It fits the older style ODS 10 controllers, covering models 15.200.001, 15.202.001, 15.205.001 and 15.206.001, and it replaces OZRoll battery part number 15.910.185. If your controller is one of those models, or your existing battery carries that part number, this cell is the matching replacement. The 148 x 57 x 15 mm dimensions match the original housing.
What are the voltage and capacity of this replacement cell?
The battery is a Ni-MH cell rated at 14.4V with a heavy duty 2000mAh capacity. That capacity provides more power for better performance than a worn original pack, which translates to more shutter cycles between charges. Ni-MH is the chemistry this controller family was built around, so the replacement behaves the way the original battery did when new.
How do I know my OZRoll controller battery needs replacing?
Typical symptoms are a controller that needs recharging far more often than it used to, shutters that stall partway through a cycle, or a controller that dies shortly after coming off charge. Because rechargeable packs degrade gradually, performance loss can creep up unnoticed. If your ODS 10 controller shows these signs and the electronics otherwise work, a fresh 2000mAh cell usually restores normal operation.
How fast is dispatch and what if the battery does not fit?
All items are dispatched within 24 hours, and standard delivery within Australia generally takes 1–5 working days. If the cell turns out not to match your controller, The Remote Factory has a 30-day return policy, and support is available at contact@theremotefactory.com.au. Checking your controller model against the 15.200.001, 15.202.001, 15.205.001 and 15.206.001 list before ordering avoids most sizing issues.
- Choosing a selection results in a full page refresh.